Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across San Fernando
If your fireplace is smoking, your damper won’t move, or your insert keeps going out, we handle the repair from the firebox up through the flue. We work on fireplaces across San Fernando, from the older tract blocks off Maclay Avenue to the ranch homes near Las Palmas Park, and we know what these chimneys were built with: original masonry, clay tile and mortar that has seen a lot of winters. San Fernando’s housing stock shapes almost every repair call here, and guessing at a fix on a stack that old rarely ends well. Call (855) 774-3956 and we’ll set up a free estimate.
Why San Fernando Homeowners Call Chimney Sweep Granada Hills for Fireplace Repair
We’re a chimney specialist, not a general contractor who adds fireplaces to a long list. Every job we take is core to what we do, so the person diagnosing your damper or firebox is the same kind of technician who installs liners and rebuilds crowns. Our technicians have up to 10 years of experience, and they’ve learned that in San Fernando the repair conversation usually starts with a question: was this stack ever designed for what’s now inside it?
That matters because a lot of work gets sold on these older homes without proof. We inspect before we recommend. A camera run down the flue shows you the cracks, the offset tiles, the failed mortar joints, and only then do we talk about repairs. You see what we see, and you decide. When work can safely wait, we tell you that too. It’s a simple standard, and it’s why homeowners in San Fernando call us back for the next thing rather than chasing a different contractor each time.
We work with professional-grade product lines that hold up: HeatShield for resurfacing and restoring deteriorated flue liners, DuraFlex for stainless liner systems, and Gelco and Famco caps where the exterior needs protecting. One call covers the sweep, the inspection, the cap and the repair, so you’re not managing three trades on one chimney.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in San Fernando
Gas Fireplace Repair
Gas fireplaces in San Fernando often sit in homes that had a wood-burning firebox first, and the conversion wasn’t always done cleanly. We check the burner, the gas valve and the venting to make sure the appliance is drawing properly and the flue is sized for it. If something was vented into an 8×8 flue that was never meant for it, that’s the kind of thing a camera inspection catches before it turns into a bigger repair.

Wood Burning Fireplace Repair
Wood fireplaces here still get real seasonal use on cool Valley evenings, and decades of it shows. We repair cracked firebox brick, deteriorated mortar joints and damaged dampers, and we reline flues that have lost their integrity. A camera inspection comes first so the repair matches what’s actually wrong, not a guess based on the age of the house. Built to last, not patched to pass.

Fireplace Insert Service
Inserts are where a lot of the trouble hides in San Fernando’s mid-century homes: a gas insert or freestanding stove added long after the house went up, vented into a stack that was never upsized for it. That produces weak draft, spillage into the room and premature liner wear. We assess whether your insert is correctly sized to its flue, service the components, and recommend a properly sized liner when the video shows the stack can’t support what’s in it.

Damper Repair
A damper that won’t close, or one that’s rusted open and stuck, is one of the most common calls we get on older San Fernando fireplaces. It matters in both directions: stuck open, you’re losing heat up the chimney all winter; stuck shut, smoke has nowhere to go. We repair or replace the damper plate and make sure it seats and moves the way it should. It’s a small job that fixes a big draft problem.
We also handle firebox repair, rebuilding mortar joints and firebrick where years of heat and settling have taken a toll. If your firebox is showing gaps or crumbling joints, that’s worth a look before the next burn season.
Trusted Brands We Service in San Fernando
We install and work with the brands professionals in this trade actually rely on: HeatShield for liner resurfacing, DuraFlex stainless liner systems, Gelco and Famco caps, plus Olympia Chimney and Copperfield components. What that means for you is a repair built on industry-recognized materials rather than anonymous off-brand parts. HeatShield capability in particular lets us restore a deteriorated liner in place when the flue is a good candidate, which is a service many sweep-only companies can’t offer at all. We don’t claim to stock parts locally, but we source the right component for your chimney and get the job done without sending you to a second contractor to finish what we started. From the firebox to the crown, one specialist handles it.
Common Fireplace Repair Problems We See in San Fernando Homes
Because so much of San Fernando’s housing went up in the 1940s – 1960s tract boom, a large share of fireplaces here are original masonry with clay-tile flues that have never been relined. Many have had gas inserts or freestanding appliances vented into those undersized 8×8 or 8×12 flues decades later. In neighboring newer subdivisions the flues are typically stainless and correctly sized, so the repair conversation here really does start with whether the stack was ever designed for what’s now in it. Here’s what we run into most:
- Clay-tile liners cracked or offset by seismic settling. The San Fernando Valley’s ground movement over the decades has left plenty of original liners with cracked, spalled or offset tiles, which lets creosote and heat reach the framing around the chimney. It stays invisible from the firebox until a camera goes down the flue.
- Add-on appliances vented into stacks never sized for them. Gas inserts and freestanding stoves added later often produce weak draft and spillage because the flue was never upsized to match. That mismatch also shortens the liner’s life.
- Cracked crowns and missing spark arrestors on tight lot lines. Older tract blocks here often share a party-wall or sit close to a neighboring roofline, which makes exterior flue access and cap replacement a tighter, more careful job. Damaged crowns and missing arrestors get deferred until a rain-soaked inspection reveals the cracking, since the post-Northridge hairline cracks in crowns don’t show up on a dry day.
- Seized dampers and crumbling firebox mortar. Wood burning through decades of mild winters takes its toll on damper plates and mortar joints. A rusted damper stuck open or shut and firebox joints that have gone soft are two of the most common repair items we see on these homes.
See the difference
Before
After
Before
After
Before
AfterPricing for Fireplace Repair in San Fernando, CA
Here’s what fireplace repair typically runs in San Fernando’s market, so you have a real starting point. Damper repair and replacement generally falls in the $250 – $575 range. Firebox repair, from tuckpointing mortar joints to rebuilding damaged firebrick, typically runs $600 – $2,200 depending on how much of the box needs work. A clay-tile flue that needs restoration with HeatShield usually comes in around $1,400 – $2,600, and a full stainless liner for an insert that needs upsizing runs roughly $2,800 – $5,500. Crown repair and cap work sit in the $400 – $1,200 range. These are estimates for the San Fernando market, and the written estimate sets the final price after we’ve seen the chimney. Nothing gets recommended without camera evidence you can watch yourself, and the estimate is free.
We Also Serve Cities Near San Fernando
Our fireplace repair team covers the towns around San Fernando as well. If you’re in Sylmar, Granada Hills, Panorama City or Sunland, we can schedule the same kind of inspection and repair, and the chimneys there share much of the same mid-century building history. When you’re searching for fireplace repair in San Fernando, one call covers the sweep, the inspection and the repair, no matter which of these neighborhoods you’re in.
Serving San Fernando, CA – Our Local Coverage Area
We serve San Fernando and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in San Fernando
Not every 1950s clay-tile flue needs relining. A cleaning is the right answer when the tiles are intact and properly sized for what’s using the chimney. The only way to know is to run a camera down the flue and look for cracks, spalling and offset joints. If the liner is sound, we clean it and tell you it’s fine. If it’s not, HeatShield restoration or a DuraFlex liner may be the right fix, and you’ll see the evidence before anyone recommends it. Call (855) 774-3956 for a free estimate.
Smoke rolling into the room is usually a draft problem, and on older San Fernando homes it often traces back to a flue that’s undersized for the appliance, a damper stuck shut, or a liner with offset tiles disrupting the draw. Sometimes an add-on insert was vented into a stack that was never sized for it. A camera inspection tells you which one it is. We look before we recommend, so you’re not paying to fix the wrong thing. Call (855) 774-3956 and we’ll set up an inspection.
Often yes, but it usually takes the right conditions. The hairline cracks the 1994 quake left in many San Fernando crowns don’t telegraph on a dry day; they show up during a rain-soaked inspection when water works into the cracks. That’s exactly why we look closely at the crown and the exterior of the stack, not just the firebox. On the tight older lot lines here, replacing a damaged crown is a tighter job, so we plan it carefully. Call (855) 774-3956 for a free estimate.
It could be either, and the pilot is the first thing we check. A dirty or misaligned pilot is a simple fix, but if the insert keeps going out, the venting or flue sizing may be the culprit, especially where an appliance was vented into an 8×8 flue never designed for it. We diagnose both sides: the appliance and the stack it breathes through. Call (855) 774-3956 for a free estimate.
Yes, even with light use. Mild winters still mean real seasonal burning, and the bigger risks in San Fernando’s older homes are structural: cracked clay tile, a seized damper, a crown with hairline cracks or a missing spark arrestor come from age and settling, not from how often you light a fire. An inspection is a standalone service, so you can get an assessment without committing to a cleaning package. If everything checks out, we’ll tell you so, and if it can wait, we’ll say that too. Call (855) 774-3956 for a free estimate.
What Happens When You Call
When you call, we’ll book a visit and a camera inspection of your flue, then walk you through what we find, on video, before we recommend any repair. You’ll get a flat-price scope agreed before we start, a photo report of the findings, and a satisfaction guarantee on the work. Call (855) 774-3956 for a free estimate on fireplace repair in San Fernando. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Granada Hills.