Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Granada Hills Homeowners
Granada Hills sits in the warm, dry San Fernando Valley, and that climate is hard on masonry. Long hot summers pull moisture out of brick and mortar, then cooler, wetter winters push water back in. Add the wind that funnels through the north valley and you get chimneys that crack, spall, and leak years before homeowners expect it. We repair those problems from the firebox to the crown, using professional-grade materials like HeatShield and DuraFlex rather than anonymous off-brand parts. Our technicians have up to 10 years of experience, and we inspect before we recommend, so you see the evidence before anyone quotes a repair. When a chimney problem can’t wait, call (855) 774-3956. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. A written, flat-price estimate is agreed before any work is booked.
What Our Chimney Repair Service Includes
Chimney damage rarely shows up in just one place. Water gets in at the top and works its way down, or a cracked flue lets heat and moisture attack the surrounding masonry. We look at the whole system and fix the root cause, not just the visible symptom. Here’s what each part of the repair work involves.
Mortar Repointing
Repointing is replacing the eroded mortar joints between bricks while the bricks themselves stay in place. You need it when the mortar has crumbled, receded, or turns to powder when you touch it, which lets water into the wall and weakens the whole stack. We grind out the failed joints to the right depth and pack in fresh mortar matched to the existing color and hardness, so the repair holds instead of cracking off in a season.
Spalling Brick Repair
Spalling is when the face of a brick flakes, peels, or pops off, usually because trapped moisture freezes or expands inside it. It’s a sign the chimney is absorbing water faster than it can dry out, and it only gets worse if the source isn’t addressed. We cut out the damaged bricks and replace them with matched units, then treat the surrounding masonry so the same thing doesn’t start again next to the repair.
Chimney Waterproofing
Waterproofing is a breathable sealer applied to the exterior masonry to keep rain out while letting moisture inside escape. It’s the right call when the brick is sound but soaking up water, and it’s one of the cheapest ways to protect a chimney before spalling begins. We apply vapor-permeable waterproofing so the masonry can still dry, since trapping moisture inside is what causes the damage in the first place.
Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s where a lot of leaks start. You need flashing repair when you see staining on the ceiling near the chimney, water in the firebox, or rusted or separated metal at the roof line. We reset or replace the flashing and seal the joints properly, because a gap there sends water straight into the attic and framing.
Chimney Rebuilding
Rebuilding means taking a chimney down to a sound level and rebuilding the damaged section, usually the top few courses where the worst wear happens. It’s the answer when the masonry is too far gone for repointing or brick replacement, or when the stack is leaning or unstable. We rebuild with proper flashing, a new crown, and materials chosen to handle Granada Hills heat and dry spells, so the repair is built to last, not patched to pass.
Tuckpointing
Tuckpointing is the finer, finished version of mortar work, where joints are shaped and dressed for a clean, uniform look as well as a tight seal. It’s often what you want on a visible chimney face where appearance matters as much as weatherproofing. We shape the joints consistently across the whole stack so the repair blends in rather than standing out as a patch.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Repair
We work with the product lines chimney professionals actually trust. HeatShield is a resurfacing system we use to restore deteriorated flue liners from the inside, which means we can often repair a damaged liner without a full tear-out. That’s a specialized skill beyond basic sweeping, and it’s a service many sweep-only companies simply can’t offer. We also install and repair DuraFlex liner systems, matching the liner to your flue and appliance so it performs the way it should.
On the exterior, we fit Gelco, Famco, and Copperfield caps and components, choosing the right cap for your flue size and the way your chimney drafts. A good cap keeps rain, birds, and debris out, and it’s the first line of defense for the masonry below. Whether you have these brands or any other make, we can help, and if something needs replacing we’ll tell you why in plain terms.
Signs You Need Chimney Repair Right Now
Some chimney problems are cosmetic. Others are telling you water or heat is already damaging the structure. Here are the signs that mean it’s time for a closer look.
- Crumbling or missing mortar joints. If the mortar between bricks is receding or turning sandy, water is getting in and the stack is weakening. Repointing now is far cheaper than rebuilding later.
- Flaking or falling brick faces. Spalling brick means moisture is trapped inside the masonry. Left alone, it spreads and takes sound bricks with it.
- Water stains on the ceiling or in the firebox. This usually points to failed flashing or a cracked crown. Water in the wrong place is a structural problem in the making.
- A leaning or visibly cracked chimney. Movement in the stack is a stability issue and worth inspecting promptly, especially after high winds or a storm.
- White chalky stains on the brick. That powdery residue is called efflorescence, and it’s a sign moisture is moving through the masonry. It’s a signal to waterproof before the damage grows.
Our Chimney Repair Process – Step by Step
We keep the process simple and transparent, so you always know what’s happening and why. Here’s how a typical repair goes.
- 1
Inspection first. We start with a full inspection of the flue and the exterior masonry, using a camera to see inside the flue and a photo report to document what we find. Nothing gets recommended that we can’t show you.
- 2
Plain-language findings. We walk you through what we found and what it means, including what can safely wait and what shouldn’t. You get the full picture before any decision about repair.
- 3
Written, flat-price estimate. You receive a written estimate with the price agreed up front, so there are no surprises when the work is done. If the number doesn’t make sense to you, ask, and we’ll explain it.
- 4
The repair itself. We carry out the work with professional-grade materials matched to your chimney, whether that’s repointing, resurfacing, flashing, or a rebuild. Every step is core to what we do, so nothing gets subcontracted to a generalist.
- 5
Final check and cleanup. We confirm the repair is sound, make sure the chimney drafts and drains as it should, and leave the site clean. You get the photo record of the work so you have it on file.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Granada Hills?
Chimney repair in Granada Hills is priced per job, and the written estimate sets the final price; the ranges below are typical estimates to help you plan, not exact quotes. A simple mortar repointing job often runs $400 – $900 depending on how much of the stack needs work. Chimney waterproofing is usually the least expensive protection and commonly falls around $300 – $600 for an average chimney. Flashing repair tends to run $350 – $800, since it depends on the roof pitch and how much metal needs resetting or replacing. Spalling brick repair and tuckpointing land somewhere in the $400 – $1,000 range based on the number of bricks involved. A partial rebuild at the top of the stack is a bigger project, often estimated between $2,000 and $6,000, and a full rebuild runs higher still. Liner resurfacing with HeatShield or a new liner install is quoted separately based on flue size and condition.
What moves the price most is scope: how much masonry is damaged, how high the work goes, and whether water has reached the framing. You avoid overpaying by getting an inspection with camera evidence first, so no one recommends a rebuild when repointing will do. Our estimate is free, it spells out exactly what’s included, and the price is agreed before we book the work. To get yours, call (855) 774-3956.
Chimney Repair Near Granada Hills – Our Service Area
We handle chimney repair across the north valley and the surrounding foothill communities, including Stevenson Ranch, Sunland, Santa Susana, Northridge, San Fernando, Sylmar, Panorama City, Porter Ranch, Lake Balboa, Chatsworth, and Reseda. Because we connect homeowners with local independent professionals, the schedule depends on where you are and how big the job is. Call and we’ll set up a time that fits, with fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Granada Hills, CA – Our Local Coverage Area
We serve Granada Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Repair in Granada Hills
Chimney repair covers the structural and weatherproofing work that keeps a chimney sound, from repointing mortar and replacing spalled bricks to fixing flashing, waterproofing the masonry, resurfacing a damaged liner, and rebuilding the top of the stack. It’s separate from a routine sweep, which removes creosote and soot. When something is cracked, loose, or letting water in, that’s repair work. We inspect first, show you the evidence, and recommend only what’s needed.
Most repairs take a day or less, while larger projects like a partial rebuild can run longer depending on scope and weather. Repointing, waterproofing, and flashing repair are typically quick jobs, and a rebuild is scheduled around the extent of the damage. We’ll give you a realistic time frame in the written estimate so you can plan. Call (855) 774-3956 to talk through your situation.
Typical estimates range from a few hundred dollars for waterproofing or small repointing jobs up to several thousand for a rebuild, all set per job by the written estimate. The final number depends on how much masonry is involved, how high the work goes, and whether water has reached the structure. The estimate is free, and the price is agreed before anything is booked. Call (855) 774-3956 for an exact quote.
Yes. We work with HeatShield liner resurfacing and DuraFlex liner systems, along with Gelco, Famco, and Copperfield caps and components. HeatShield is a resurfacing system that can restore a deteriorated flue liner from the inside, which often saves homeowners from a full liner tear-out. If your chimney has one of these brands or any other make, we can help, and we’ll explain what’s involved before any work starts.
Yes, same-day repair is often available, and we answer the phone 24/7. Fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 774-3956 and we’ll find a time that works.
Our repair work is backed by a satisfaction guarantee, and we stand behind the materials and workmanship on every job. Because we use professional-grade products like HeatShield and DuraFlex, the repair holds up the way it should. If something isn’t right with our work, we want to hear about it. Call (855) 774-3956 and we’ll take care of it.
Clear access to the fireplace and the chimney’s exterior, and move anything breakable away from the hearth. If you have a gas log set, we’ll let you know if it needs to be turned off before we arrive. Have any previous inspection reports or warranty paperwork on hand if you have them. That’s about it, and we’ll walk you through any specifics when we book the appointment.
Schedule Your Chimney Repair Service in Granada Hills Today
Don’t let a small masonry problem turn into a structural one. Call Chimney Sweep Granada Hills at (855) 774-3956 to book your chimney repair. We inspect before we recommend, use materials professionals trust, and agree the price in writing before any work begins. Your estimate is free and there’s no obligation. We answer 24/7.
Written by the team at Chimney Sweep Granada Hills.