Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Granada Hills Homeowners
A fireplace that smokes, won’t light, or smells off is a problem you want handled by someone who understands the whole system, not just the part that looks broken. In Granada Hills, where ranch homes and older builds often carry fireplaces that have gone years without service, the cause is usually something we can trace in a single visit. Our technicians have up to 10 years of experience, and we inspect before we recommend so you’re never paying for a repair you don’t need. We answer 24/7 at (855) 774-3956, and same-day repair is often possible with fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Fireplace Repair Service Includes
Every repair job starts with a look at the firebox, damper, flue, and whatever’s feeding the fire. We work through the components in order because one problem often causes another, and fixing the symptom alone just moves the failure down the line. Here’s what each part of the job covers.
Gas Fireplace Repair
Gas fireplaces fail in a handful of predictable ways: weak or uneven flames, a burner that won’t stay lit, soot building where it shouldn’t, or a valve that’s stiff or unresponsive. When you need this looked at, it’s because the fireplace isn’t behaving the way it did, or because you smell gas or notice discoloration around the logs. We diagnose the burner, valve, and connection points, correct what’s causing the fault, and confirm the unit is venting properly before we leave. Gas work of any kind belongs to a trained technician, so we don’t recommend opening the valve assembly or trying to re-light a stubborn unit yourself.

Wood Burning Fireplace Repair
Wood fireplaces show wear in the firebox brick, the mortar joints, the damper, and the smoke chamber above. You need repair when you see cracked or spalling brick, crumbling mortar, smoke rolling into the room, or a fire that struggles to draw. We assess the firebox and the flue together, repair deteriorated masonry or resurface it with HeatShield where that’s the right fix, and make sure the smoke path is clear so the fireplace draws the way it should.

Fireplace Insert Service
An insert sits inside the firebox and depends on a properly sized liner and a tight connection to work safely. Service is needed when the insert rattles, heats unevenly, or when the liner behind it has degraded. We pull the insert where the job calls for it, inspect the liner and the surround, and restore the connection so the unit performs as designed. If a DuraFlex liner is the right replacement, we install it and show you why it’s the better fit for your flue.

Damper Repair
The damper is the metal door above the fire that controls draft and keeps outside air out when the fireplace is cold. It needs repair when it sticks, won’t seal, or has rusted into place, and a stuck-open damper is the most common reason a fireplace feels drafty year-round. We free stuck dampers, repair or replace the hardware, and check the frame for gaps that let air through even when the damper is closed. A damper that seals properly makes every fire easier to control.
Firebox Repair
The firebox is the chamber where the fire actually burns, and it takes the most heat of any part of the system. Repair is needed when you see cracks in the brick or panels, missing mortar, or a surface that’s flaking away, since a compromised firebox can let heat reach the structure behind it. We repair or resurface the firebox with professional-grade material, and HeatShield resurfacing is a capability many sweep-only outfits don’t offer. Built to last, not patched to pass.
Pilot Light Repair
A gas fireplace’s pilot light or electronic ignition is what lets the unit light on command, and it fails in small, frustrating ways: the pilot won’t stay lit, the ignition clicks without catching, or the flame goes out shortly after the burner ignites. You need this looked at when lighting becomes unreliable or when you smell gas near the unit. We diagnose the thermocouple, ignition, and gas supply, correct the fault, and test the unit through several cycles. This is trained gas work, and it’s not something to attempt on your own.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with professional-grade product lines, which matters because a repair is only as good as the material that goes into it. HeatShield is a resurfacing system used to restore deteriorated firebox and flue surfaces, and our technicians are trained in its application – it’s a specialized skill that goes beyond basic sweeping and lets us save a firebox that would otherwise need a full rebuild. DuraFlex liner systems are what we turn to for insert liner work and flue relining, because they’re built to hold up under sustained heat.
For the top of the system, Gelco and Famco caps protect the flue from water and animals, and Olympia Chimney components round out the parts we use when a repair calls for them. But whether you have a DuraFlex liner, a HeatShield-restored firebox, or any other make of fireplace, we can help. We diagnose what’s actually wrong and recommend the fix that fits your unit and your home.
Signs You Need Fireplace Repair Right Now
- Smoke backing into the room. When smoke rolls out instead of up, the draft is compromised, often by a damper or smoke-chamber problem. It’s uncomfortable and can leave soot and odor through the house, so it’s worth a look before the next fire.
- Cracked or crumbling firebox brick. Small cracks grow with every fire, and heat can reach the structure behind a compromised firebox. This is one sign you shouldn’t wait on.
- Smells or soot around a gas unit. A gas fireplace that smells odd or shows soot where it shouldn’t usually has a burner or venting fault. Stop using it and have it checked.
- A damper that won’t move or seal. A stuck damper either makes fires hard to control or lets cold air and pests in when the fireplace is cold. Both are fixable.
- Weak or uneven flames. Flames that are listless or different from one burner to the next point to a gas or airflow issue. It’s the kind of problem that’s simple to trace with the right tools.
Our Fireplace Repair Process – Step by Step
- 1
We inspect before we recommend. We start by looking at the fireplace, the flue, and the venting as a system, not as isolated parts. That means checking the firebox, damper, smoke chamber, and flue together so we understand the full picture before we suggest anything.
- 2
We show you what we found. Camera inspection and a photo report are part of the process, so you can see the condition of the firebox and flue for yourself. You shouldn’t have to take our word for it that a part needs replacing.
- 3
We give you a flat-price estimate. Once we know what’s wrong, we write up a flat-price estimate and agree on it with you before any work starts. No surprises on the bill, and no pressure to approve work you don’t need.
- 4
We complete the repair with industry-trusted materials. Whether it’s a HeatShield resurfacing, DuraFlex liner work, or a new Famco cap, we use professional-grade parts and confirm the repair holds up to a real test before we finish.
- 5
We check the whole system before we leave. We test the fireplace through a full cycle, confirm the draft is right, and walk you through what we did. If a repair can safely wait, we tell you that too.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Granada Hills?
Fireplace repair in Granada Hills typically runs from a minor fix in the low hundreds up to a full firebox rebuild in the low-to-mid four figures, depending on what’s wrong and which components are involved.
| Repair type | Typical cost | What affects the price |
|---|---|---|
| Pilot light or ignition repair | $95 – $250 | Part type, access to the unit |
| Damper repair or replacement | $160 – $420 | Repair vs. full replacement, frame condition |
| Gas fireplace repair | $120 – $400 | Burner, valve, or venting fault |
| Firebox resurfacing (HeatShield) | $450 – $1,200 | Extent of deterioration, prep work |
| Insert service with liner work | $350 – $1,500 | Liner length and material, insert removal |
| Firebox rebuild or major masonry | $1,200 – $3,500 | Damage extent, brick vs. panel construction |
What affects the price most is how deep the damage goes and whether the fix is a repair or a replacement. A cracked panel is a simpler job than a full firebox rebuild; a liner swap depends on length and material. The best way to avoid overpaying is to insist on seeing the evidence before approving work, and we build that into every job with a camera inspection and photo report. Nothing is recommended without evidence you can see, and we’ll tell you plainly when work can safely wait. The written estimate sets the final price, and estimates are free.
Fireplace Repair Near Granada Hills – Our Service Area
Fireplace repair here covers Granada Hills and the neighborhoods around it, including Northridge, Porter Ranch, Santa Susana, and Sylmar, with regular service out toward Stevenson Ranch and Sunland. Most of these areas are within a short drive, so same-day repair is often possible with fast dispatch from 7am to 7pm, Sunday through Friday. Whether you’re in a ranch home off a quiet side street or a newer build closer to the hills, you get the same inspection-first approach: chimney sweep Granada Hills starts with a look, not a sales pitch.
Serving Granada Hills, CA – Our Local Coverage Area
We serve Granada Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Granada Hills
Fireplace repair is the work of fixing the parts of a fireplace that have failed, worn, or degraded – the firebox, damper, gas burner, pilot light, insert, or the masonry around them. It covers everything from a minor ignition fix to a full firebox rebuild, depending on what the inspection turns up. We look at the fireplace as a system so a repair in one part doesn’t leave a problem in another. Call (855) 774-3956 for an exact quote.
Most minor repairs, like a damper fix or pilot light service, are done in a single visit, often within a couple of hours. Larger jobs like a firebox rebuild or insert liner work can take longer and may need more than one visit, depending on access and materials. We give you a realistic timeline with the estimate so you know what to expect. Call (855) 774-3956 to book an inspection.
Fireplace repair in Granada Hills typically runs from about $95 for a simple ignition fix up to $3,500 for a full firebox rebuild, with most jobs landing somewhere in between. The price depends on the component involved, how much damage there is, and whether the fix is a repair or a replacement. You get a flat-price estimate agreed before any work starts. Call (855) 774-3956 for an exact quote – estimates are free.
Yes, we work with DuraFlex liner systems and HeatShield resurfacing, along with Famco, Gelco, Olympia Chimney, and Copperfield components. HeatShield application in particular is a specialized skill that many sweep-only competitors don’t offer, and it can save a firebox that would otherwise need a rebuild. If your fireplace uses these brands, we can service it. Call (855) 774-3956 to schedule.
Same-day repair is often possible in Granada Hills with fast dispatch from 7am to 7pm, Sunday through Friday, and the phones are answered 24/7. We’re closed Saturday, and a call outside dispatch hours is booked into the next opening. Call (855) 774-3956 and we’ll find the earliest slot that works.
We stand behind our work with a satisfaction guarantee, and we use professional-grade materials because a repair is only as good as what goes into it. The details of coverage depend on the specific repair and the parts involved, and we walk you through that with the estimate. If something isn’t right after we leave, you call us back. Call (855) 774-3956 with any questions about coverage.
Clear the area around the fireplace and, if there’s an ash bed, leave it – we’ll handle it during the inspection. Make a note of when the problem started and what it looks like, whether the fire smokes, the pilot won’t stay lit, or you notice a smell, since that helps us trace the cause faster. We bring the tools and the camera equipment we need. Call (855) 774-3956 to confirm your appointment.
Schedule Your Fireplace Repair Service in Granada Hills Today
If your fireplace is smoking, struggling to light, or showing cracks, one visit from a specialist tells you exactly what’s wrong and what it takes to fix it. We inspect before we recommend, use industry-trusted materials, and give you a flat-price estimate before any work begins. Call (855) 774-3956. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. No-obligation estimate, and no pressure to approve work that can safely wait.
Written by the team at Chimney Sweep Granada Hills.