Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Granada Hills?
A new chimney cap in Granada Hills typically runs $250 to $700 installed, and a crown repair or rebuild usually falls between $400 and $1,600, depending on the size of the crown and how much of it has cracked away. If you need both at once, a cap-and-crown job generally lands in the $650 to $2,200 range. These are typical estimates for the Granada Hills market in 2026, and your written estimate sets the final price.
The reason the range is wide comes down to materials and how much of the crown has failed. A cast crown that’s split but still sitting on the flue can often be resurfaced. A crown that’s broken into pieces and letting water pour into the masonry behind it has to be rebuilt, and that changes the scope. We inspect before we recommend, so you’re not paying to rebuild something that only needs repair. From the firebox to the crown, that’s the whole point of calling a chimney specialist instead of a generalist.
Key Takeaways
- A chimney cap installed in Granada Hills usually costs $250 to $700.
- Crown repair runs about $400 to $900; a full crown rebuild runs $800 to $1,600.
- Combined cap and crown work typically falls between $650 and $2,200.
- Water intrusion is the number one cause of chimney damage, and the cap and crown are what stop it.
- Estimates are free. Call (855) 774-3956. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap & Crown Cost Breakdown (2026)
Every job is different, but these line-item ranges reflect what homeowners in Granada Hills typically see for cap and crown work. Use them to budget, then get a written estimate for your specific chimney.
| Line item | Typical range | Notes |
|---|---|---|
| Standard cap install (single-flue, stock size) | $250 – $450 | Famco, Gelco, or Olympia Chimney caps in a standard size |
| Multi-flue or custom-fabricated cap | $400 – $700 | Larger footprint, custom dimensions, or specialty design |
| Crown repair (patch and seal existing crown) | $400 – $900 | For cracking that hasn’t broken the crown apart |
| Crown rebuild (new cast or formed crown) | $800 – $1,600 | When the crown is separated from the flue or badly deteriorated |
| Crown sealing / waterproofing only | $300 – $600 | Crown intact but porous; seals against moisture absorption |
| Cap and crown together | $650 – $2,200 | Common combination, often quoted as one job |
| Flue liner repair (if crown work exposes it) | $500 – $1,800+ | HeatShield resurfacing or DuraFlex liner depending on condition |
What pushes a quote toward the top of these ranges? Custom-sized caps take longer to fabricate and fit. A crown that’s cracked in a way that lets water reach the masonry behind it needs more than a patch. And if the crown is off and the flue is exposed, we sometimes find a deteriorated liner underneath, which is the moment a cap-and-crown job becomes a liner restoration too. That’s not a sales tactic; it’s what we find when we look. A cap that’s sized wrong or a crown that’s sealed over a wet flue can trap moisture instead of stopping it, so the materials matter.
On the lower end: a stock-size cap on a single-flue chimney with a crown that just needs sealing is a straightforward job. We use professional-grade products from brands that chimney professionals actually rely on, and we match the product to the chimney rather than the other way around.
What Affects Chimney Cap & Crown Pricing in Granada Hills
Granada Hills sits in the San Fernando Valley, where the climate is dry for much of the year and then gets a short, mild wet season. That pattern matters to your chimney. Long dry spells let masonry dry out and crack, and the first rains of the season find every crack. Sun exposure on a south-facing crown is hard on the material, and the Valley heat working on a masonry crown over time is exactly what causes the spiderweb cracking we see. Here’s what moves price:
- Crown size and shape. A simple rectangular crown on one flue is less expensive than a large, multi-flue crown with a complex footprint. Custom shapes take more labor and material.
- Material choice. A poured or cast crown using proper mortar mix or a specialty crown product holds up better than a thin mortar wash. The better materials cost more up front and last longer, which is the whole idea behind built to last, not patched to pass.
- How much of the crown has failed. Surface cracking is a repair. A crown that’s separated from the flue or crumbling at the edges is a rebuild. That’s the single biggest swing in the price.
- Cap style and material. A standard stainless or galvanized cap with a mesh screen is the most affordable. Decorative or custom copper caps cost more. Chimney caps need to be sized to the flue and to handle the wind and debris that come with the neighborhood’s tree cover.
- Chimney height and roof access. A taller chimney or one on a steep roofline takes more setup and ladder work. Two-story homes in Granada Hills generally cost a bit more for the same job than single-story homes.
- What we find underneath. If the crown is removed and the flue liner is cracked or spalling, that has to be addressed before the new crown goes back on. HeatShield resurfacing and DuraFlex liner systems are options we work with, and which one applies depends on the damage.
One more factor worth naming: whether the chimney has a cap at all. A chimney without a cap is taking in rain, birds, squirrels, and debris year-round. Capping it stops all of that at once, and it’s the cheapest preventive step there is. Our chimney cap & crown work is designed around that idea, which is that water is the enemy and the fix goes at the top.
How to Save on Chimney Cap & Crown
You don’t need to spend top dollar to protect your chimney well. A few practical moves keep the cost down without cutting corners:
- Get the cap on before the crown fails. A $250 to $450 cap now can prevent a $1,600 crown rebuild later. That’s the whole economics of preventive care.
- Fix cracking early. A crown that’s just starting to crack can often be sealed for $300 to $600. Wait until it’s crumbling and the same crown costs three times that.
- Bundle the work. If you need a cap and crown work, doing both in one visit is usually cheaper than two separate calls. We quote them together when that makes sense.
- Combine it with a sweep or inspection. If you’re due for a cleaning or you’re buying a home, a chimney sweep Granada Hills visit and cap-and-crown work in the same appointment saves on setup. A standalone inspection is also available if you just want a professional assessment.
- Choose the right cap, not the fanciest one. A well-built standard cap from Famco, Gelco, or Olympia Chimney does the job. A decorative custom cap is a design choice, not a safety requirement.
- Ask for a written estimate. Estimates are free. Call (855) 774-3956 and we’ll look at the chimney and put the numbers in writing.
What we won’t do is push work you don’t need. If your crown is solid and just needs a cap, we’ll tell you. If it needs a rebuild, we’ll show you why. We inspect before we recommend, and the recommendation is based on what the chimney actually needs.
Why Chimney Caps and Crowns Matter in Granada Hills
The crown is the concrete or mortar surface at the very top of the chimney, the part that sheds water away from the masonry. The cap sits over the flue opening and keeps rain, animals, and debris out. Together they do the job the rest of the chimney can’t do for itself: keep water where it belongs. A chimney in Granada Hills that goes without a cap for a few seasons is taking in every rainstorm and every bit of airborne debris. The crown cracks, water gets behind it, and the freeze-and-thaw of a single cold snap can turn a hairline crack into a chunk of missing crown. Once water reaches the masonry, you’re looking at repairs that go well past the cap-and-crown budget.
That’s why this is a dedicated service for us, not an add-on. A general handyman can set a cap, but sizing it right, sealing the crown correctly, and knowing the difference between a crown that needs repair and one that’s failed structurally is a specialty. When we’re on a roof for a cap or crown, we’re also looking at the flue, the liner, and the masonry, because those are the things that fail next if they’re already compromised. One call covers it: the sweep, the inspection, the cap, the crown, and any repair that follows. You don’t need a second contractor to finish what was started.
If you’ve noticed a drip inside the firebox, water stains on the chimney exterior, or rust on the damper, the cap and crown are the first things we check. Our chimney repair service handles the structural side when the damage is already done.
Chimney Cap & Crown FAQs
How much does a chimney cap cost in Granada Hills?
A chimney cap in Granada Hills typically costs $250 to $450 for a standard single-flue size, and $400 to $700 for a multi-flue or custom-fabricated cap. Installation is included in those ranges. Call (855) 774-3956 for an exact quote; estimates are free.
How much does chimney crown repair cost in Granada Hills?
Crown repair runs about $400 to $900 when the crown can be patched and sealed, and a full crown rebuild runs $800 to $1,600 when the crown is separated or crumbling. The difference comes down to how much of the crown has failed, so the estimate starts with a look at the top of the chimney.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper when the damage is surface cracking and the crown is still attached to the flue; sealing or patching typically runs $300 to $600. Rebuild is the better value when the crown has broken apart, because sealing over a failed crown just traps water. A crown that’s rebuilt properly with the right materials lasts far longer than repeated patches.
Can you fix a chimney cap or crown the same day?
Many cap installations can be done same day if the flue is a standard size and the cap is in stock, and simple crown sealing can often be handled in one visit. A custom cap or a full crown rebuild may need a return visit for fabrication and curing. Call (855) 774-3956 to book; we answer 24/7 and dispatch fast from 7am to 7pm, Sunday through Friday.
Do I need a permit for chimney cap or crown work in Granada Hills?
Cap installation usually doesn’t require a permit, but crown repair or rebuild can cross into masonry repair that some jurisdictions regulate. We’ll tell you during the estimate whether yours is likely to need one, and you can confirm with the City of Los Angeles Department of Building and Safety. If a permit is needed, that cost gets built into the written estimate so there are no surprises.
What Happens When You Call
When you call (855) 774-3956, we ask a few questions about your chimney, your roof, and what you’ve noticed, then set up a time for an on-site look. We answer 24/7, and we dispatch fast from 7am to 7pm, Sunday through Friday. The technician inspects the crown, the cap, the flue, and the visible masonry, then walks you through what’s needed and what isn’t. You get a written estimate with the price for the job, and the estimate is free. No pressure, no upsell, no work you didn’t agree to.
Our technicians have up to 10 years of experience, and they work with the same professional-grade product lines that chimney specialists across the industry trust, including Gelco, Famco, and Olympia Chimney caps, DuraFlex liner systems, and HeatShield resurfacing. That means the materials on your chimney are the ones built to hold up to Granada Hills sun and the wet season, not whatever’s cheapest at the hardware store. It’s the difference between a cap that lasts and one that rusts out in a couple of seasons.
Contact Us for a Free Estimate
Whether you need a cap installed, a crown repaired, or a full assessment of what’s going on at the top of your chimney, we’re one call away. Call (855) 774-3956 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’re weighing a cap against a crown repair, or you’re not sure which you need, we’ll tell you straight after we’ve looked. That’s how a specialist should work.
Pricing reflects the Granada Hills market as of 2026. Chimney Sweep Granada Hills offers free estimates – call (855) 774-3956.
Written by the team at Chimney Sweep Granada Hills.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Megan Fletcher"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Rosa Garcia"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Whitney Padgett